INDUSTRIAL

Medical

With exciting breakthrough technologies in diagnostic imaging equipment, wireless telemetry and patient monitoring, Vectron's product portfolio is supporting the growth of Medical Industry. Our products offer superior quality and reliability as well as the industry's lowest phase noise, lowest jitter and the best stabilities in the smallest footprints. These diagnostic tools are becoming more independent on the advancements of precision oscillators and frequency generation devices. Vectron is committed to the achieving the performance needed to support the future requirements demanded by these critical applications.

Jump to product families shown below:
OCXO TCXO SAW Filter VCXO STD XO

Oven Controlled Crystal Oscillators (OCXO)

Show All OCXO products >>

Product	Crystal Cut	Frequency Range (MHz)	Output Supply	Aging	Temperature Stabilities to -40°C to +85°C	Features
OX-400 OCXO	AT	10 to 160	HCMOS 3.3 & 5V	< ± 300ppb/year < ± 2.5ppm/10years	10 ppb	- Stratum 3 over the Industrial Temp Range
OX-400 OCXO	SC	10 to 52	HCMOS 3.3V	< ± 100ppb/year < ± 700ppb/10years	10 ppb	- Stratum 3 over the Industrial Temp Range
OX-200 OCXO	AT	10 to 100	HCMOS/Sinewave 3.3V, 5V, or 12V	< ± 250ppb/year < ± 2ppm/10years	10 ppb	- Stratum 3 over the Industrial Temp Range
OX-200 OCXO	SC	10 to 100	HCMOS/Sinewave 3.3V, 5V, or 12V	< ± 100ppb/year < ± 500ppb/10years	10 ppb	- Stratum 3 over the Industrial Temp Range

top of page

Temperature Compensated Crystal Oscillator - TCXOs

Show All TCXO products >>

Product	Frequency Range (MHz)	Output Supply	Temperature Stabilities to -40°C to +85°C	Features
VT-800 TCXO	10 to 40 MHz	CMOS Clipped Sinewave		- Tight Stability Reference Clocks (CMOS & Clipped Sinewave)
VT-700 TCXO	10 to 40 MHz	CMOS Clipped Sinewave		- Tight Stability Reference Clocks (CMOS & Clipped Sinewave)
TX-508 TCXO	10 to 100 MHz	HCMOS LVCMOS	±25.0ppm	- Low G-Sensitivity - High shock resistant - Vibration hardened - Random Vibration according to MIL-STD-202G; Method 214A; Condition II-D 0.1 g2/Hz / 30 grms

top of page

SAW Filters

Show All SAW Filter products >>

Product	Center Frequency (MHz)	Bandwidth	Pass Band Ripple	Insertion Loss	Group Delay Ripple	Features
TFS1413 SAW Filter	1413.25	36.50 MHz	BWOP	3.8 dB	25 ns	- 50 Ohm - No Matching - Low Loss - Tight Transition
TFS2441A SAW Filter	2441.75	83.5 MHz	BWOP	6.5 dB	5 ns	- Wide Bandwidth - Low Group Delay Ripple (GDR)
TFS403A SAW Filter	403.5	3.0 MHz	1.5 dB	5.5 dB	100 ns	- Small Footprint Med IF - Great Rejection
TFS611A SAW Filter	611	6.0 MHz	1.0 dB	6.0 dB	30 ns	- 75 Ohm System - Tight Transition
TFS433K SAW Filter	433.42	0.15 MHz	3.0 dB	5.0 dB	700 ns	- Narrow Bandwidth - Temp Stable - High Selectivity
TFS210C SAW Filter	210	8.2 MHz	1.0 dB	22.0 dB	60 ns	- Great Ultimate Rejection and Narrow Bandwidth
TFS210G SAW Filter	210.82	1.6 MHz	3.0 dB	11.0 dB	240 ns	- Temp Stable - Great Rejection

top of page

Voltage Controlled Crystal Oscillator - VCXOs

Show All VCXO products >>

Product	Frequency Range (MHz)	Output Supply	Features
VX-700 VCXO	80 to 200.0	LVPECL	- Discrete PLL VCXO with Jitter Performance less than 120fs rms jitter
VX-703 VCXO	1 to 77.76	TTL CMOS	Jitter performance <6 ps rms (output freq >12MHz)
VX-508 VCXO	10 to 120	HCMOS LVCMOS	- Low G-Sensitivity - High Shock Resistant - Vibration Hardened - Random Vibration according to MIL-STD-202G; Method 214A; Condition II-D 0.1 g2/Hz / 30 grms
VX-501 VCXO	1 to 700	HCMOS PECL LVDS LVPECL Sinewave	- FR4 based VCXO with exceptional in-close phase noise

top of page

Clocks/Crystal Oscillator - XO

Fundamental/3rd Overtone

PLL Crystal Oscillator

NEW Parametric Search

Show All XO products >>

Product	Frequency Range (MHz)	Output Supply	Features
VC-708 XO	20 to 200	LVPECL LVDS	- 47 fs RMS jitter typcial 12kHz–20MHz - Ultra Low Jitter Performance, 3rd OT Crystal Design
VC-820 XO	625 kHz to 133.00 MHz	CMOS	- Small Size - Fundamental Oscillator with Low Jitter Perform - CMOS Output XO
VCC6 XO	10 to 350	LVPECL LVDS	- Reference clocks with jitter <300 fs RMS - PECL, LVDS
PX-508 XO	10 to 120	HCMOS LVCMOS	- Low G-Sensitivity - High shock resistant - Vibration hardened - Random Vibration according to MIL-STD-202G; Method 214A; Condition II-D 0.1 g2/Hz / 30 grms
PS-702 XO	150 to 1000	LVPECL LVDS	- Higher Frequency Reference Clocks with Jitter <100fs RMS
PX-501 XO	1 to 700	HCMOS PECL LVDS Sinewave	- FR4 based XO with exceptional in-close phase noise

top of page